Heat Resistance Tungsten Carbide Products , Cemented Carbide Blade
Tool
Introduction of Tungsten Carbide Products
Tungsten carbide rod shows all the superiorities of tungsten
carbide, such as good wear and corrosion resistance, high
toughness, etc.
Precisely speaking, its chemical composition is mainly tungsten
carbide powder, with Co or Ne as its binder.
Tungsten carbide rods with several TC Grades used for various
metals and non-metal cutting tools for such as drills, end mills,
reamers.
Also widely used in stamping tools and wear-resistant tools,etc.
Tungsten Carbide Products Advantages
1. made from 100% virgin raw material;
2. produced with advance equipments and process;
3. all products go through in-process and final inspection
The Features and the uses of cemented carbide
| Mark | ISO standard | Density g/cm³ | Hardness HRA | Bending strength ≥ MPa | Grain size | Features and notice | use |
| RX20 | K05 | 14.5 | 91.2 | 2100 | fine | Comprehensive properties, high hardness and high strength alloys
widely used in woodworking field | Suitable for all types of wood processing, also for the processing
of metal and non-metal materials |
| RX10T | K10 | 14.5 | 91.8 | 1800 | fine | The cutting edge is sharp and the wear resistance is very good. It
is easy to crack at high temperatures. It is recommended to use
high frequency induction welding or automatic welding machine. | It is suitable for the cutting of high-density boards, high-fiber
boards and particleboards for woodworking tools. It is also
suitable for finishing and semi-finishing of cast iron, non-ferrous
metals and alloys. |
| RX10 | K10 | 14.75 | 90.5 | 2200 | medium | Good wear resistance and impact resistance, resistance welding can
be used. | It is used for impact-resistant and nail-proof cutting of dry wood,
cork, mixed wood and cement board, and is suitable for all types of
forming knives in the furniture manufacturing industry. |
| YG6X | K10 | 14.9 | 90.8 | 1950 | fine | Good abrasion resistance | It is suitable for machining cold hard cast iron and heat resistant
alloy, also suitable for finishing common cast iron. It is used to
make casing cemented carbide tools and wear resistant parts. |
| YG6 | K20 | 14.95 | 90.5 | 2000 | medium | It has good wear resistance and impact toughness. Resistance
welding can be used, but the welding temperature should not be too
high. | It is suitable for the processing of ordinary cutting wood saws,
cast iron aluminum profiles and copper rods. |
| YG8 | K20 | 14.80 | 89.5 | 2000 | medium | It has good wear resistance and impact toughness. Resistance
welding can be used, but the welding temperature should not be too
high. | It is suitable for the processing of non-ferrous metal profiles,
dry wood, cork and hardware tools. Suitable for making ordinary
sawtooth, it can also be used to make wear parts, general holes and
metal processing. |
| YG8Ak | K20 | 14.75 | 90.0 | 2200 | medium | Wear resistance and hardness are good, resistance welding can be
used, but welding temperature should not be too high. | Suitable for the processing of hardwood and ordinary wood |
| YG8C | K30 | 14.75 | 88.5 | 2300 | thick | Good impact toughness | Suitable for artificial marble, common wood with weeds, weeds and
thickets. |
Packaging
1,soft foam to prevent the surface being scratched in one small
carboard boxes, several small boxes in one larger hard carboard
with fills to avoid a slope, besides hard carboard is easy to load
and transport
2, we can also arrange packaging according to your special
requirements or discuss
3,product code on cardboards instead of any company information
such as logo to keep deal information secret and beneficial to
customs clearance
Shipping
There are three ways to be choose, as follows:
1,International Express: UPS,TNT,DHC
2,Port transportation: all ports
3,We delivery products according to customer’s requirements and
paid by buyer after the destination confirmation
4,take insurance for the goods according to contract
