CNC Tungsten Carbide Bar Stock / Tungsten Carbide Square Bar
PVD/CVD Coating
Introduction of Tungsten Carbide Bar Stock
Tungsten carbide is a hard material composed of a metal matrix
composite where carbide particles act as the aggregate and a
metallic binder serves as the matrix. It is one of the most
successful composite engineering materials ever produced. Its
unique combination of strength, hardness and toughness satisfies
the most demanding applications.
Tungsten carbide is used in machining tough materials such as cast
iron or steel, as well as in situations where other tools would
wear away, such as mining tools and wear parts. Most of the time,
carbide will leave a better finish on the part,and allow faster
machining. Carbide tools can also withstand higher temperatures
than standard high speed steel tools.
Tungsten Carbide Bar Stock Applications
Carbide plate is a highly efficient and green material, which
features qualities of stainless steel: Corrosion resistance,
oxidation resistance, wear resistance, bonding proof and acid-base
resistance; And ensures its good strength, toughness, bending and
stretching, impact resistance.
Tungsten carbide strip is used for woodworking cast iron cutting
tool. It can be used in many field such as woodworking, machining
of refractory alloys, stainless steel, high manganese steel, for
processing cast iron, non-ferrous metal and aluminum section bar,
etc
The Features and the uses of Tungsten Carbide Bar Stock
| Mark | ISO standard | Density g/cm³ | Hardness HRA | Bending strength ≥ MPa | Grain size | Features and notice | use |
| RX20 | K05 | 14.5 | 91.2 | 2100 | fine | Comprehensive properties, high hardness and high strength alloys
widely used in woodworking field | Suitable for all types of wood processing, also for the processing
of metal and non-metal materials |
| RX10T | K10 | 14.5 | 91.8 | 1800 | fine | The cutting edge is sharp and the wear resistance is very good. It
is easy to crack at high temperatures. It is recommended to use
high frequency induction welding or automatic welding machine. | It is suitable for the cutting of high-density boards, high-fiber
boards and particleboards for woodworking tools. It is also
suitable for finishing and semi-finishing of cast iron, non-ferrous
metals and alloys. |
| RX10 | K10 | 14.75 | 90.5 | 2200 | medium | Good wear resistance and impact resistance, resistance welding can
be used. | It is used for impact-resistant and nail-proof cutting of dry wood,
cork, mixed wood and cement board, and is suitable for all types of
forming knives in the furniture manufacturing industry. |
| YG6X | K10 | 14.9 | 90.8 | 1950 | fine | Good abrasion resistance | It is suitable for machining cold hard cast iron and heat resistant
alloy, also suitable for finishing common cast iron. It is used to
make casing cemented carbide tools and wear resistant parts. |
| YG6 | K20 | 14.95 | 90.5 | 2000 | medium | It has good wear resistance and impact toughness. Resistance
welding can be used, but the welding temperature should not be too
high. | It is suitable for the processing of ordinary cutting wood saws,
cast iron aluminum profiles and copper rods. |
| YG8 | K20 | 14.80 | 89.5 | 2000 | medium | It has good wear resistance and impact toughness. Resistance
welding can be used, but the welding temperature should not be too
high. | It is suitable for the processing of non-ferrous metal profiles,
dry wood, cork and hardware tools. Suitable for making ordinary
sawtooth, it can also be used to make wear parts, general holes and
metal processing. |
| YG8Ak | K20 | 14.75 | 90.0 | 2200 | medium | Wear resistance and hardness are good, resistance welding can be
used, but welding temperature should not be too high. | Suitable for the processing of hardwood and ordinary wood |
| YG8C | K30 | 14.75 | 88.5 | 2300 | thick | Good impact toughness | Suitable for artificial marble, common wood with weeds, weeds and
thickets. |
FAQ
Q: Do you set an MOQ and any discounts could be offered?
A: Don't worry! We don't have an MOQ and no matter how many you
want to order is ok with us. But more quantity with more discount.
Q: Can this kind of products be customized?
A: Yes, we offer custom-made service for our clients. You just need
to provide us some technical data such as dimensions.
Q: How long will you deliver the goods after I place an order?
A: We will send the items within 7 days once your payment is
completed. We do not guarantee delivery time on all international
shipments due to differences in customs clearing times in
individual countries, which may affect how quickly your products is
inspected.
Q: What's the warranty of the products?
A: If any quality problems on our side occured in this period, we
will take on the shipping cost and replacement.
Q: How can I choose a shipping method?
A: For small quantities, express of DHL/UPS/Fedex door to door
service is the best; for bulk quantities, shipping by sea is the
best but takes too much time. For urgent orders, we suggest
shipping by Air to airport.
