Chemical Resistant Tungsten Carbide Square Bar , Wood Cutting
Tungsten Carbide Blanks
Introduction of Carbide Wear Strips
Compared with steel strips, tungsten carbide strips are much more
wear resistant and temperature resistant. They're widely use in
many field such as woodworking, machining of refractory alloys,
stainless steel, high manganese steel, for processing cast iron,
non-ferrous metal and aluminum section bar, etc.
Applications of Carbide Wear Strips
Carbide plate is a highly efficient and green material, which
features qualities of stainless steel: Corrosion resistance,
oxidation resistance, wear resistance, bonding proof and acid-base
resistance; And ensures its good strength, toughness, bending and
stretching, impact resistance.
Tungsten carbide strip is used for woodworking cast iron cutting
tool. It can be used in many field such as woodworking, machining
of refractory alloys, stainless steel, high manganese steel, for
processing cast iron, non-ferrous metal and aluminum section bar,
etc
| GSGrade | ISO Grade | Density (g/cm3) | Hardness (HRA) | T.R.S (MPα) | Grain Size | Performance & Application Recommended |
| RX10 | K20 | 14.6-15.0 | 90~90.5 | 2200~2400 | Medium | High hardness, suitable for roughing of iron, solid wood, dry wood
or nonferrous metal, ceramic and other alloys. |
| RX20 | K30 | 14.6-15.0 | 90~90.5 | 2600~2800 | Fine | High toughness, easy to be brazed without heat preservation.
Suitable for rosewood, solid wood, pinewood, and other wood with a
lot stammer. |
| RX10T | K10 | 14.6-15.0 | 92.5~93 | 1800-2000 | Ultrafine | High hardness, suitable for finishing of iron, nonferrous metal,
ceramic and other alloying, semifinishing of of hardwood,
chipboard, MDF and HDF. Better to use silver soldering. |
| AB10 | K40 | 13.8-14.2 | 87.5~88 | 2800~3000 | Coarse | High toughness, difficult to break tooth. Special used for finger
jointing tool.
|
Traditional tool grades and usage recommendations
| Iso classification grouping code | Mark | Density g/cm³ | Hardness HRA | Bending strength ≥ MPa | use |
| K01 | YD05 | 14.90 | 93.0 | 1600 | It is specially used for processing various nickel-based,
cobalt-based, iron-based and tungsten carbide-containing
self-fluxing spray alloy materials, and can also be used for the
processing of hardened steel. |
| K05 | YG3X | 15.10 | 91.8 | 1600 | Suitable for finishing, fine boring of cast iron, non-ferrous
metal, heat resistant alloy and titanium alloy. |
| K10 | YD101 | 14.95 | 92.1 | 2500 | It has excellent wear resistance and toughness. It is used for
finishing and finishing of non-ferrous metals and cast irons,
especially for the processing of aluminum and its alloys. Turning
is suitable for medium and high speed, and medium speed is
recommended for milling. |
| YG6X | 14.95 | 91.5 | 2300 | Suitable for finishing of cast iron, non-ferrous metals,
heat-resistant alloys and titanium alloys. |
| K20 | YD201 | 14.89 | 91.0 | 2500 | Suitable for roughing to semi-finishing of heat resistant alloys
and titanium alloys, cast iron and aluminum alloys. |
| YG6 | 14.95 | 89.5 | 2000 | Suitable for semi-finishing and light-load roughing of cast iron,
non-ferrous metals and their alloys, heat-resistant alloys,
titanium alloys and non-metallic materials. |
| YG8 | 14.75 | 89.0 | 2200 | It is suitable for roughing of cast iron, non-ferrous metals and
their alloys, heat-resistant alloys and titanium alloys. It has
high impact resistance and is suitable for continuous and
interrupted cutting. |
| M05 | YS8 | 13.90 | 92.5 | 1800 | It is suitable for the finishing of iron-based, nickel-based
superalloys and high-strength steels. It is also suitable for the
finishing of chilled cast iron, heat-resistant stainless steel,
high-manganese steel, hardened steel and glass products. |
| M10 | YW1 | 13.0 | 91.5 | 1600 | Suitable for semi-finishing of stainless steel and common alloy
steel. |
| YW3 | 12.9 | 92.0 | 1800 | Suitable for finishing and semi-finishing of stainless steel and
common alloy steel. |
| M20 | YS2T | 14.40 | 91.5 | 2500 | Suitable for finishing and semi-finishing of stainless steel and
low alloy steels and iron-based alloys, as well as for integral
milling of low alloy steels. |
| YW2 | 12.9 | 91.0 | 2000 | Suitable for finishing and semi-finishing and light-load roughing
of stainless steel and alloy steel. |
| M30 | YL10.2 | 14.50 | 92.0 | 2800 | Suitable for high temperature alloys, heat resistant alloys,
titanium alloys, etc., especially for coarse and semi-finishing of
aerospace materials, allowing intermittent turning with increased
rake angle. |
| P10 | YC10 | 10.31 | 92.0 | 1600 | Suitable for finishing steel and cast steel, with cutting speed and
low feed low depth. |
| P20 | YC201 | 11.79 | 91.8 | 1800 | Suitable for semi-finishing and light-load roughing of steel, cast
iron and stainless steel, it is a universal mark with good
applicability. |
| YS25 | 13.0 | 90.5 | 2200 | Specially used for rough milling of steel and cast steel. |
| YT14 | 11.40 | 90.5 | 1800 | Specially used for semi-finishing of steel and cast steel. |
| P30 | YT5 | 12.81 | 89.5 | 1900 | Specially used for heavy cutting of steel and cast steel, in the
case of poor working conditions, roughingwith medium and low speed
and large feed. |
| YC330S | 12.95 | 90.5 | 2200 | Specially used for milling of steel and cast steel, it has good
toughness and good impact resistance, and is the preferred grade
for gravity milling. |
| P40 | YC45 | 12.75 | 90.0 | 2550 | Suitable for gravity cutting of steel and cast steel, it can be
used for large cutting, also for section milling. |
OEM/ODM
Rich Experience In OEM
We are in a position to accept orders against customers samples
specifying design, specifications
and packaging requirements.
Various kinds of Packing box are for your choose.
OEM Packing box with your logo is not a problem.
