Good Straightness Tungsten Carbide Bar Machining Process Easy To Be
Brazed
Introduction of Tungsten Carbide Bar
Tungsten Carbide Bar has good straightness, excellent hardness, and
stable toughness. It offten applied to metal and steel cutting and
machining process.
Tungsten carbide strip can be used for woodworking andcast iron
cutting applications. It can be used in many field such as
woodworking, machining of refractory alloys, stainless steel, high
manganese steel, for processing cast iron, non-ferrous metal and
aluminum section bar, etc
Cemented carbide can also be used for making the drill bits/
end-mills / reamers; automobile special cutters, printed circuit
board special cutters, engine special cutters, horologe processing
special cutters, integral vertical milling cutter, graver and etc.
Besides, they can be also used for making of cemented carbide
stamping head, core bar and perforation tools.
With high quality raw material and advanced equipment, G.S.carbide
provides customer superior quality Hard Alloy Bars Blank.
1. Easy to be brazed, good wear resistance and toughness.
2. Untrafine grain size raw material to keep excellent strength and
hardness.
3. Both standard sizes and customizes sizes are available.
Tungsten Carbide Bar Advantage:
1. Over 10 Years' efforts in making high quality Hard Alloy Strips
Blank and strips, Almost 8 years in doing importing and exporting
business.
2. Rich experience in grade researching, mould designing, automatic
press, HIP sintered, surface treating and quality control.
3. We have many years of experience in producing the tungsten
carbide strips and have gained a wide reputation in the market .
Welcome your inquiry anytime
Traditional tool grades and usage recommendations
| Iso classification grouping code | Mark | Density
g/cm³ | Hardness
HRA | Bending strength
≥ MPa | use |
| K01 | YD05 | 14.90 | 93.0 | 1600 | It is specially used for processing various nickel-based,
cobalt-based, iron-based and tungsten carbide-containing
self-fluxing spray alloy materials, and can also be used for the
processing of hardened steel. |
| K05 | YG3X | 15.10 | 91.8 | 1600 | Suitable for finishing, fine boring of cast iron, non-ferrous
metal, heat resistant alloy and titanium alloy. |
| K10 | YG6X | 14.95 | 91.5 | 2300 | Suitable for finishing of cast iron, non-ferrous metals,
heat-resistant alloys and titanium alloys. |
| K20 | YD201 | 14.89 | 91.0 | 2500 | Suitable for roughing to semi-finishing of heat resistant alloys
and titanium alloys, cast iron and aluminum alloys. |
| YG6 | 14.95 | 89.5 | 2000 | Suitable for semi-finishing and light-load roughing of cast iron,
non-ferrous metals and their alloys, heat-resistant alloys,
titanium alloys and non-metallic materials. |
| YG8 | 14.75 | 89.0 | 2200 | It is suitable for roughing of cast iron, non-ferrous metals and
their alloys, heat-resistant alloys and titanium alloys. It has
high impact resistance and is suitable for continuous and
interrupted cutting. |
| M05 | YS8 | 13.90 | 92.5 | 1800 | It is suitable for the finishing of iron-based, nickel-based
superalloys and high-strength steels. It is also suitable for the
finishing of chilled cast iron, heat-resistant stainless steel,
high-manganese steel, hardened steel and glass products. |
| M10 | YW1 | 13.0 | 91.5 | 1600 | Suitable for semi-finishing of stainless steel and common alloy
steel. |
| YW3 | 12.9 | 92.0 | 1800 | Suitable for finishing and semi-finishing of stainless steel and
common alloy steel. |
| M20 | YS2T | 14.40 | 91.5 | 2500 | Suitable for finishing and semi-finishing of stainless steel and
low alloy steels and iron-based alloys, as well as for integral
milling of low alloy steels. |
| YW2 | 12.9 | 91.0 | 2000 | Suitable for finishing and semi-finishing and light-load roughing
of stainless steel and alloy steel. |
| M30 | YL10.2 | 14.50 | 92.0 | 2800 | Suitable for high temperature alloys, heat resistant alloys,
titanium alloys, etc., especially for coarse and semi-finishing of
aerospace materials, allowing intermittent turning with increased
rake angle. |
| P10 | YC10 | 10.31 | 92.0 | 1600 | Suitable for finishing steel and cast steel, with cutting speed and
low feed low depth. |
| P20 | YC201 | 11.79 | 91.8 | 1800 | Suitable for semi-finishing and light-load roughing of steel, cast
iron and stainless steel, it is a universal mark with good
applicability. |
| YS25 | 13.0 | 90.5 | 2200 | Specially used for rough milling of steel and cast steel. |
| YT14 | 11.40 | 90.5 | 1800 | Specially used for semi-finishing of steel and cast steel. |
| P30 | YC330S | 12.95 | 90.5 | 2200 | Specially used for milling of steel and cast steel, it has good
toughness and good impact resistance, and is the preferred grade
for gravity milling. |
| P40 | YC45 | 12.75 | 90.0 | 2550 | Suitable for gravity cutting of steel and cast steel, it can be
used for large cutting, also for section milling. |
